AiniFadlilah

Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#vlan 10

Switch(config-vlan)#name vlan10

Switch(config-vlan)#ex

Switch(config)#vlan 20

Switch(config-vlan)#namw vlan

^

% Invalid input detected at '^' marker.

Switch(config-vlan)#

Switch(config-vlan)#

Switch(config-vlan)#name vlan20

Switch(config-vlan)#ex

Switch(config)#int range fa0/1-2

Switch(config-if-range)#switchport mode access

Switch(config-if-range)#switchport access vlan 10

Switch(config-if-range)#ex

Switch(config)#int range fa0/3-4

Switch(config-if-range)#switchport mode access

Switch(config-if-range)#switchport access vlan 20

Switch(config-if-range)#ex

Switch(config)#int fa0/5

Switch(config-if)#sw mo trunk

Switch(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to up

Switch(config-if)#ex

Switch(config)#ex

Switch#

%SYS-5-CONFIG_I: Configured from console by console

Switch#show vlan

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/6, Fa0/7, Fa0/8, Fa0/9

Fa0/10, Fa0/11, Fa0/12, Fa0/13

Fa0/14, Fa0/15, Fa0/16, Fa0/17

Fa0/18, Fa0/19, Fa0/20, Fa0/21

Fa0/22, Fa0/23, Fa0/24

10 vlan10 active Fa0/1, Fa0/2

20 vlan20 active Fa0/3, Fa0/4

1002 fddi-default act/unsup

1003 token-ring-default act/unsup

1004 fddinet-default act/unsup

1005 trnet-default act/unsup

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

1 enet 100001 1500 - - - - - 0 0

10 enet 100010 1500 - - - - - 0 0

20 enet 100020 1500 - - - - - 0 0

1002 fddi 101002 1500 - - - - - 0 0

1003 tr 101003 1500 - - - - - 0 0

--More--

HASIL PENGUJIAN DARI PC 1KE PC 3

 HASILNYA REPLAY KARENA 

         SESAMA VLAN

HASIL PENGUJIAN DARI PC 2 VLAN 20 KE PC 2 VLAN 10

      HASILNYA RTO KARENA BEDA VLAN